Product image
Pool Cues
Two-piece and one-piece cues with maple or ash shafts, stainless or wood joints, linen or leather wraps.
58"18–21 oz12.5–13 mm
We manufacture pool, snooker and carom cues for distributors, club suppliers and private brands. One factory, one QC standard, from shaft selection to final inspection.
MOQ from 50 pcs · Samples in 7–10 days · Reply within 24 hours
Six product lines covering the full cue category, each available as stock models or built to your drawings, wood spec and branding.
Two-piece and one-piece cues with maple or ash shafts, stainless or wood joints, linen or leather wraps.
Hand-spliced ash cues with ebony or rosewood butt, turned and finished to competition tolerance.
Three-cushion cues with high-density core and reinforced ferrule for controlled power transfer.
Low-deflection carbon shafts in custom tapers, with adjustable weight and interchangeable joint pins.
Hard and soft cases, 1×1 to 3×5 configurations, with printed or embossed branding on shell and lining.
Chalk, tips, gloves, extensions, joint protectors and bridges — sourced and branded as a single shipment.
Send us a drawing, a sample or a reference photo. We handle wood selection, turning, splicing, inlay, wrap, finishing and packing — then ship under your own label.
A fixed six-stage flow, so you always know which step your order is in and when it will leave the factory.
Share your target model, quantity and market. We reply within 24 hours with cost and feasibility.
Taper, weight, wood grade and branding confirmed in a written spec sheet with unit price.
Pre-production samples in 7–10 days, photographed and shipped for your approval.
25–35 days depending on inlay complexity and finishing requirements.
Straightness, weight tolerance, joint alignment and finish checked piece by piece.
Export cartons, palletizing and documentation. Sea, air or express as required.
Every cue is measured, not eyeballed. The same inspection sheet travels with the batch from first turning to final packing.
Rolled and sighted on a flat bed; shaft and butt checked separately and assembled.
Digital weighing to ±0.5 oz, balance point recorded per unit.
Pin and collar tolerance tested on every assembled cue before wrapping.
Kiln-dried blanks, controlled humidity, cured finish checked for sink and orange peel.
Send your target model, quantity and market — we will come back with pricing, lead time and a sample plan.